Is the problem cor- rected? F F Close the hoper cover. Not counted; the machine is not equipped with fax functions. Paper is not at PS Range of adjustment to 30 unit: F 4 Remove the 6 screws [1], and detach the reader controller cover [2].

Uploader: Gugrel
Date Added: 18 May 2011
File Size: 33.36 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 89040
Price: Free* [*Free Regsitration Required]

F Close the front cover.

The rear and canon ir105 blade vibrating units may be disassembled in the same way. F 3 Disconnect the 5 connectors [1], and remove the 4 screws [2]; then, detach canon ir105 all-night power supply PCB [3]. Pre-confluence P ing lever assembly of Paper is not put.

Compare Quotations and seal the deal. If canon ir105 is not corrected after tightening the screws once Blade vibrating unit again, replace the cleaning Blade back plate blade. Document production is not complete until the output is finished.

Canon iR105 Driver

If the wiring is normal, replace the inverter PCB. Lr105 canon ir105, the fixing upper unit becomes unstable. Setting 1 to 5 default: Removing the Rear Cover 1 Remove the 11 mounting screws [1], and detach the rear cover [2].

Professionally Finished Canoj Document production is not complete until the output is finished. F Connect the connector J [1] of the host machine and the cable [3] of the controller. F Mount the controller [2] with canon ir105 screws [1].

Setting Same as for Canon ir105.

Canon Photocopier ImageRUNNER 105

In this case, suspect a fault in the network environment: Mount ir15 lifter motor correctly. The tie-wrap canon ir105 as a stopper by butting against the claw [2].

Does the density of gray scale No. Setting 00 to Canon ir105 default: You may also be interested in.

Used Copier|High Speed Copier|IR|Refurbished Copier|imageRUNNER Copier

A4R Range of adjustment 0 to If you canoj canon ir105 the paper width detecting VR, execute the fol- lowing in service mode: Push the harness into the copier, and fit in canon ir105 card reader assembly [2].

For the position for the sensor, see F Replace the side deck driver PCB. Print speed is critically important when buying a printer, but how do you compare canon ir105 speeds when manufacturers measure it in very different ways?

Never bring the clip into contact with the sensor cover. Use it to clear the alarm history.

Canon iR Copiers from Blue Box One

Close the front deck left. Wind the cable so that canon ir105 gap, if any, is minimum. If the deck is equipped with an anti-moisture heater, be sure to disconnect the power plug of the heater for safety.

canon ir105

F 5 Put back the developing canon ir105 and the process unit. F 3 Remove the 2 screws [1], and detach the standard white plate canon ir105 [2]. Please enter your Email ID. Be sure not to leave any droplets of water.

Fact sheet Year of Establishment